這些便攜式米的范圍廣泛的應用是合適的,如教育,農業和園藝,以及水和環境分析。這些更容易和更快的校準的便攜式米有一個小,符合人體工程學和打火機的設計。其他特點包括100%大容易閱讀的液晶顯示屏和電池壽命長。
所有儀表都提供PH或ORP電極和校準解決方案。
•MW100執行與分辨率0.1的pH的pH值測量與手動溫度補償。
•mw101執行與分辨率0.01的pH的pH值測量與手動溫度補償。
•mw102是一個基于微處理器的pH /溫度擴展范圍表(-2.00 16 pH值),自動溫度補償,2的自動校正點和±0.02 pH值的準確性。
•mw500執行一系列的ORP的測量±1000 MV。
規格 | MW100 PH計 | mw101 PH計 | mw102 PH/溫度計 | mw500 ORP計 |
測量范圍 PH/ORP 溫度 | 0.0-14.0 PH | 0.00-14.00 PH | -2.00-16.00 PH -5-70℃ | ±1000mv |
分辨率 PH/ORP 溫度 | 0.1 PH | 0.01 PH | 0.01PH 0.1℃ | 1mv |
精度 PH/ORP @25℃ 溫度 | ±0.2PH | ±0.02PH | ±0.02PH ±0.5℃ | ±5mv |
EMC偏差 PH 溫度 |
|
| ±0.02PH ±0.5℃ |
|
溫度補償 | N.A. | 手動0-50℃ | 自動0-70℃ |
|
校準 | 手動2點校準 | 手動2點校準 | 自動 1或2點校準 |
|
PH電極 | se220(包括) | se220(包括) | se220(包括) |
|
ORP電極 |
|
|
| SE300(包括) |
溫度探頭 |
|
| ma830r(包括) |
|
使用環境 | 0-50℃最大相對濕度95% | |||
電池 | 1X 9V堿性電池(包括),可連續使用300小時左右 | |||
自動關機 | 無 | 無 | 不使用后8分鐘后 | 無 |
尺寸 | 145*80*40mm | |||
重量 | 220g(含電池) |
訂購信息
MW100和mw101是標準配置為: 主機,se220pH電極, pH7.01,20毫升袋校準溶液,校正螺絲刀,9V電池和操作手冊。
mw102標準配置為: 主機, se220 pH電極, ma830r不銹鋼溫度探頭, ph4.01, pH7.01,20毫升袋校準溶液, 9V電池和操作手冊
mw500標準配置為: 主機, SE300鉑電極,9V電池和操作手冊。
附配件:
m10004b pH 4.01 緩沖溶液 20毫升/袋(25個)
m10007b pH7.01 緩沖溶液 20毫升/袋(25個)
m10010b PH10.01緩沖溶液 20毫升/袋(25個)
ma9004 pH 4.01緩沖溶液 230毫升瓶
ma9007 pH7.01緩沖溶液 230毫升瓶
ma9015 電極保存液,230毫升/瓶
ma9016 電極清洗溶液,230毫升/瓶
ma830r 溫度探頭
ma9020 200~275 MV ORP標準液,230毫升/瓶
se220 pH電極帶BNC接口, 1米電纜
se300 鉑ORP電極以及1米電纜
特 點: a、儀器靈敏度高,對環境本底亦有響應 b、采用單片機技術,功能多,體積小 c、儀器操作簡單,使用方便 d、累積劑量、劑量率切換顯示 e、抗電磁干擾能力強 技術指標: 1、探測器:硅半導體探測器 2、測量顯示范圍: 劑量率: 0.1 μSv/h~999.9 mSv/h 累計劑量: 0.0 μSv~9999 mSv 3、報警閾: 劑量率: 1 μSv/h~1 Sv/h之間連續可調 累計劑量: 1 μSv~10 Sv之間連續可調 4、報警功能: 以聲(蜂鳴器)、光(LED)及LCD指示進行累積劑量及劑量率超閾、電池欠壓、工作超時和探測器失效報警。可設置不同累積劑量增量提示聲音(聲響強度 > 80dB, 距劑量儀30cm處)。 5、能量響應:<±20%(48 keV ~ 1.5 MeV) 6、線性誤差:1 μSv/h ~ 1 Sv/h,≤15%。 7、抵沖擊和振動:符合IEC1283標準要求 8、過載特性:大于20 Sv/h 9、電 源:AA型3.6V電池一節,電池壽命 >1000小時 (50 mSv/年,1.8 Ah)。 10、欠壓指示:當電池電壓≤3.1±0.1V時,顯示欠壓符號 11、溫度特性: 0 ~ +40℃測量值變化<±10% -10 ~ +50℃測量值變化<±15% 12、相對濕度: 40% ≤RH≤95% (35℃)時測量值變化<±10% 13、重量:100g 14、尺寸:90×62×25 mm
SDM2000U Personal Dosimeter Function The dosimeter is used to monitor the personal dose equivalent and dose equivalent rate of X, γ radiation. DE, DER and total working time can be read out switched by pressing function button. It incorporates audile, visual and LCD indicator alarms to warn user when preset dose/dose rate threshold levels are exceeded. The threshold can be set random in measurement range. Real-time measurement data can be storage in non-volatile memory that will not lose after power off. Record data can be transmitted through infrared communication to the Record Reader, and the reader can communicates with computer via RS485 mode interface transport. Dosimeter can be used alone or with the reader and computer network data management system. Features 1、Wide-range, low power consumption, resistance to overload 2、Real-time an Non-volatile data record 3、Displaying cumulative dose, dose rate and working hours 4、Audio, visual and LCD indicating over-threshold alarm 5、Threshold can be set in measurement range 6、Standardized measurement data can be managed by professional software via IR communicator 7、Advanced design to ensure the safety and reliability of measurement Specifications 1、measurement range:Hp(10): 0.01Sv10Sv Hp(10): 0.1Sv/h1Sv/h 2、Alarm threshold Continuously set .during measurement range for dose and dose rate. Dose increment alarm: can be set during 1Sv999Sv Over time: 16000min 3、Alarm Gives audile, visual and LCD indicating alarm for over-threshold, under-voltage, over time, detector failure and DE increment tips. Sound intensity > 80dB (@30cm) 4、LCD Display Hp(10): 0.00Sv9999mSv Dose rate Hp(10): 0.01Sv/h1999mSv/h 5、energy response <±30%(50keV1.5MeV) 6、DR response <±20% (1Sv/h10Sv/h) <±15% (10Sv/h1Sv/h) 7、Overload:>20Sv/h 8、Power:One AA size Lithium Battery 3.6V 9、Battery Life >2000h. 10、8 hours last when under-voltage alarms 11、Temperature <±10%, -10℃+40℃ 12、Humidity <±10%, 40%90%RH(35℃) 13、Weight 95g 14、Dimensions 90×62×25(excluding clip) |
供應商:上海仁日輻射防護設備有限公司 |
![]() |
|